200x200x1.5mm Thermal Pad, 6W/m.k Thermal Conductivity/Non Conductive/Insulation/heat resistance/High temperature resistance/Heat Sink Silicone Sheet Pads For Laptop Heatsink/GPU/CPU/LED Cooler
- Main Features:
thermal pad has 6.0 W/m K Thermal Conductivity, Used to fill the gap between the heating element and the Heatsink, Achieve the best cooling effect,
At the same time, the thermal pad also has Insulation, Non-conductive, wear-resistant, fire-retardant, compression, buffering, no damage to metal materials, etc effect.
Why use thermal silicone Pad ?
1) The main purpose of the choice of Thermal Pad is to reduce the heat source surface and the heat dissipation device contact surface between the contact thermal resistance,
Thermal conductivity of silicone Pad can be good filling the gap between the contact surface;
2) because the air is hot bad conductor, will seriously hinder the heat transfer between the contact surface,
And in the heat source and the radiator between the installation of thermal silica Pad can be out of the air cont...read more - Manufacturer: Aikenuo
- More products from seller: Amazon
- Your price: USD 19.99(as of 2019-04-17 08:32 UTC - More info)
- As an Amazon Associate we earn from qualifying purchases.
- Note: Prices are subject to change at anytime
-
- Search for:
- > Conductive
- > High Temperature
- > High Temperature Heat
- > Aikenuo Thermal
- > Heat Insulation
- > Heat Insulation Silicone
- > High Heat
- > CPU Cooler
- > Silicone Pad Non
- > Silicone Sink
- > Conductivity
- > Heat High
- > Heat High Temperature
- > Thermal Temperature
- > High Temp Silicone
- > Laptop Cool
- > Silicone LED
- > Silicone Sheet
- > Laptop High
- > Heatsink
- > The High
- > Insulation
- > Resist The
- > Heat Pad
- > Silicon High
- > Cool The
- > The Cool
- > Thermal Pad
- > Thermal Pad Thermal
- > The Resistance
- > Cool Pads
- > Heat Resistance
- > Heat Resistance Silicone
Also interesting:
- HHO Dry Cell whit 17-19 A and 14.4 V TEST 2
- HHO Dry Cell whit 17-19 A and 14.4 V TEST 3
- How to improve ABS print quality on a 3d printer
- Thermal Pads vs Thermal Paste - Don't try this!
- Ask GN 83: IC Graphite Thermal Pads, Worst Products Reviewed
- HHO Dry Cell whit 17-19 A and 14.4 V TEST 3
- How to improve ABS print quality on a 3d printer
- HHO Dry Cell whit 17-19 A and 14.4 V TEST 2
- Ask GN 83: IC Graphite Thermal Pads, Worst Products Reviewed
- Thermal Pads vs Thermal Paste - Don't try this!
This videos may be of interest:
Here some other interesting products:
